Using top quality 304 stainless steel tube is an intelligent choice for your budget and project’s longevity. It is lucrative in comparison to other materials. Its durability and the high-quality guarantee that your product lasts a long time and the design is appropriate for commercial and home use. 304 stainless steel is the most ordinary form of stainless steel used worldwide because of its outstanding corrosion- resistance and value. It includes between 16 and 24% chromium and up to 35 % nickel, and small amounts of manganese and carbon. The most common 304 stainless steel type is 18-8 stainless steel, which comprises 18 % chromium and 8 % nickel.

Quality Stainless Steel Tube

Typical Uses of 304 Stainless Steel Tube

304 can undergo corrosion from the popular oxidizing acids. That sturdiness makes 304 simple to sanitize and thus perfect for food applications and the kitchen. It is also common in décor, buildings, and site furnishings. The top quality 304 stainless steel tube is commonly used for:

  • Fasteners and finishing hardware (nuts, screws, plates, bolts, handles)
  • Storage tanks
  • Residential appliances
  • Pots and pans
  • Indoor architectural/decorative hardware (sculptures, panels, sconces)
  • Residential sinks and sink parts
  • Equipment tubing

Advantages of 304 Stainless Steel

  • This stainless steel tube comes with outstanding corrosion resistance and high-quality resistance to intergranular rust. Oxidizing acids, such as concentration is greater than 65% under the boiling temperature of nitric acid, with powerful corrosion resistance. Most of the organic acids, alkali solution, and inorganic acids also have high-quality corrosion resistance.
  • It enhances low-temperature performance. At -180 ℃ strength, condition, area reduction rate, elongation is outstanding. In the lack of brittle transition temperature, they are frequently used at low temperatures.
  • Great cold and hot forming performance and process. Can do processing of tube, board, wire, tape, type of product, for the manufacture of deep drawing, cold heading, deep drawing forming parts.
  • It has excellent weldability. The welding method can be used frequently, both before welding devoid of heat treatment after welding.
  • Food equipment, atomic energy industrial parts, general chemical equipment, etc., are extensively used. Ideal for infusion pipes and deep-drawing, containers, and so on. Automobiles, auto parts box home applications are also utilized in the steel. This is austenitic stainless steel manufacture and the biggest steel amount, for the manufacture of an acid pipeline, thin-walled parts, and structural parts. They are also used for welding stainless steel core material, chrome-nickel stainless steel, low-temperature environment, and non-magnetic factors such as the use of components.

In addition, 304 stainless steel pipe can be used for transporting liquids. Stainless offers superior durability, high corrosion resistance, fair resistance to thermal, high strength-to-weight ratio,  electrical conductivity, ease of cleaning, ease of fabrication, and non-magnetic and harden-able by cold working.

Which Should you Select – 304 or 316?

Some circumstances set apart the two grades of stainless steel, but both are legends on their territory. The cases under which Grade 304 is a better choice are:

  • The application necessitates excellent formability. The higher molybdenum content in 316 can have severe consequences on formability, making 304 a better choice.
  • The application has fundamental cost concerns. Given that grade 316 is more corrosion resistant, it has an increased direct cost.

The below-mentioned situations emphasize cases where Grade 316 might be a better choice:

  • When the surroundings comprise a high concentration of corroding elements such as in marine application or the dishwasher
  • When the material is submerged in water or have steady exposure to water
  • In applications where formability is less of a worry and durability and strength are required
  • In applications where non-magnetic permeability is necessary.
  • The total cost, however, is defensible by the long life cycle directly. Thus, corrosion resistance and formability and must help you select between grade 304 and grade 316.

Criteria to Select the Best of Grades

With more than 50 stainless steel grades to select from, choosing a grade is not always perfect. With expert advice, you can be sure which grade of pipes best goes with your project. Here are some things to think about first:

  • Transition in-process phase
  • The timeline of material generation or application
  • Adaptation of new material because of bad performance
  • Cost-reduction via the change of basic material

The Basic Types of Pipes Obtainable are:

  • Basic ferritic
  • Duplex
  • Basic martensitic
  • Austenitic peak temperature steel

Stainless steel Class is a Wide-Ranging Spectrum and Vital Elements Comprise:

  • Mechanical strength
  • Fire-resistance
  • Corrosion resistance
  • Magnetic response
  • Life span cost

The environment in which the stainless steel product will be located is important when determining the choice of the top quality 304 stainless steel tube. The concentration of chemicals that comprise chlorides and acids, atmospheric conditions is the fundamental concern of corrosion resistance. For less corrosive environments, the most favored grades of austenitic stainless steel would be grade 304.


You may also like : 5 Things You Should Know About PTFE Flexible Hoses